Update content

How to enable IPv6 SLAAC on Dedibox servers

Reviewed on 09 May 2023 • Published on 03 August 2021
Requirements:

Activation of IPv6 SLAAC (stateless autoconfiguration of addresses) assigns one /128 IPv6 prefix to your server (one usable IPv6 address). This IP is statically linked to your server and can not be attributed to another server.

Note:

This feature is not yet available for all servers. Only the servers that are compatible show the related button.

  1. Click Server > Server list to display a list of all your servers.
  2. Click Manage next to the server you want to configure. The server’s status page displays.
  3. Scroll down to the servers network section and click Activate IPv6 SLAAC:

Your server’s IPv6 SLAAC is now activated and displays in the network section.

Tip:

If required, you can disable your server’s IPv6 SLAAC by clicking on the button Disable IPv6 SLAAC.

See Also